极品少妇被猛得白浆直流草莓视频_曰本无码人妻丰满熟妇5g影院_久久久久无码国产精品不卡_国产精品久久久久久免费软件_国产内射爽爽大片视频社区在线

Hotline::

18675275155

JT80-50 type tensile shear molding integrated machine

Nothing

詳情介紹

Instruction manual for pull shear molding machine

 

(Vertical JT80-50 type)

 

1、 Preface

JT80-50 type tensile shear molding integrated machine; It is a self-developed equipment by our company for pulling and shearing magnetic ring inductor pins; This model is designed specifically for magnetic ring inductors such as T14 * 7 * 7 T18 * 10 * 10 T25... with commonly used wire diameters of 1.0MM-2.5MM. It provides the ability to complete stretching, shearing, and shaping work, with the entire process completed in 0.3 seconds. A circular inductor pin cutting and shaping equipment with high processing efficiency, good product quality, and reduced labor costs. Due to its stable equipment and wide adaptability, it is loved by the circular inductor processing industry.

 

2、 Main features

◆: Overall compact and compact, the panel is made of top-notch steel material, with a surface electroplated and hardened treatment, and the design surface is flat; Designed in accordance with ergonomics, hands will not feel tired after prolonged operation; Aluminum alloy sandblasting oxidation chassis, making the overall weight lighter and appearance more beautiful;

◆: The wire outlet is made of 8mm thick steel protective plate. Protect the machine's cutting blades from injuring hands. Safer operation;

◆: Newly added pressure gauge plate, with intuitive tension and easy adjustment;

◆: By turning the knob on the pressure gauge, adjust the tension according to different types of magnetic rings and wire force sizes:

◆: Adopting a large inner diameter cylinder, stable operation, strong cutting force, and fast speed.

◆: Wide compatibility, the small ring can be directly formed, and can be used to shape and repair the upper bottom plate and soldered products. Directly replace the old molding foot clipper.

◆: Using a regular 0.8mpa air compressor air source. 220V power input.

 

3、 Installation instructions

 

1. The filter regulator should be installed vertically, with the left side connected to the air compressor and the right side connected to the machine, with a pressure of 0.4-0.45MPA (which has been adjusted at the factory and should not exceed 0.5MPA). Otherwise, the cutting blade may not cut or pull straight;

2. Observe whether there is water in the jar every day, drain the water from the top and bottom of the jar, and push out the water from the top pin to prevent water from entering the solenoid valve and damaging the components.

 

Attention: The stabilizing filter should not be connected in reverse. It is required to be fixed and not adjustable. Check the moisture content every day

 

4、 Function Description

 

Pressure gauge - displays the current clamping force of the wire. The higher the value, the tighter the wire is pulled;

Tension adjustment - Adjust the clamping force of the product pins. (1 pressure gauge display) The higher the adjustment, the tighter the pulling, and the more beautiful the foot position. Note that adjusting too high may cause pin breakage; Some products may also experience poor pressure resistance; Or some products with thick lines (2.0-2.5mm or above) may experience the phenomenon of the cutter not cutting. Adjust the appropriate tension according to the actual situation of each different product.

Main air inlet - connect to the voltage stabilizing filter provided with the machine (the filter must be connected, otherwise water entering the machine will damage the equipment in advance)

Power socket - household 220V power interface

Power switch - If the equipment is parked for a long time and the fixture is replaced, be sure to turn off the power foot switch interface - connect the attached 2-core foot switch.

 

5、 Replace the fixture

1: First, turn off the power. Loosen the bolt of the fixture cover plate, take out the fixture cover plate, and then install the complete set (5 pieces+1 fixture head) of fixtures in sequence

Home
Phone
Feedback
主站蜘蛛池模板: 久久婷婷五月国产色综合| 嫖妓丰满肥熟妇在线精品| 日韩精品专区av无码| 真人一进一出120秒试看| 亚洲午夜精品一区二区| 奇米影视7777久久精品人人爽| 国产亚洲精品久久久久久大师| 亚洲欧洲av综合色无码| 精品人妻一区二区三区四区在线| 女人扒开屁股爽桶30分钟| 全免费a级毛片免费看视频| 7777奇米四色成人眼影| 日日噜噜大屁股熟妇| 一本久道久久综合狠狠爱| 精品无码中文视频在线观看 | 精品97国产免费人成视频| 久久人人爽人人爽人人片av | 久久精品国产99久久久古代| 亚洲性色av一区二区三区| 无码人妻丰满熟妇啪啪| 狠狠躁夜夜躁av网站中文字幕| 波多野结衣乱码中文字幕| 性视频播放免费视频| 成人黄色电影网| 国产精品香港三级国产av| 久久久久女教师免费一区| 樱花草视频www日本韩国| 久久久久久国产精品无码超碰动画| 亚洲爆乳无码一区二区三区 | 亚洲一区二区三区影院| 海角社区在线视频播放观看| 亚洲国产美女精品久久久久| 天天综合色天天综合色h| 欧美日本免费一区二区三区| 色翁荡息又大又硬又粗又视频软件 | 亚洲精品国产第一综合99久久| 丰满少妇被猛男猛烈进入久久| 欧美性受xxxx黑人猛交| 久久婷婷国产剧情内射白浆| 欧美黑人乱大交| 亚洲国产日韩在线人成蜜芽|